Profile
Name
Easy Composites Ltd
Description
Easy Composites Ltd is one of the World's premier suppliers of advanced composite materials and equipment. We believe in providing the best possible technical information and advice to help customers all over the world achieve better products and master cutting edge techniques. One way in which we do this is by creating comprehensive video tutorials on a range of composites processes and sharing them with everyone.
We hope you enjoy our videos; please watch, 'like' and comment to be a part of it.
We hope you enjoy our videos; please watch, 'like' and comment to be a part of it.
Subscribers
461K
Subscriptions
Friends (2)
Channel Comments
|
henrycollins2478
(4 minutes ago)
I have work due in an hour, and I’m watching this. Nice work self!
|
|
easycompositestv
(9 minutes ago)
Yes, the mould can be reused dozens if not hundreds of times. We use Uni-Mould based moulds in our own workshop for some of our production parts and they wear very well. The more you look after them the better they will last. By having a good gelcoat finish you can also at occasional intervals re-polish the mould to take out any scratches or dulling that has occured with regular use.
|
|
|
easycompositestv
(17 minutes ago)
Depends on the engine bay temperatures. A engine with good heat shielding will generally not be a problem as the air temp under the bonnet will not likely reach more than 60C. Some high powered cars may be higher so you need to check.
|
|
|
easycompositestv
(27 minutes ago)
You're welcome! We're working on some more pretty exciting professional carbon fibre tutorials so keep an eye on our site and this channel!
|
|
bigpower7777
(32 minutes ago)
Lots of patience required to do this line of work. I could see why CF hoods and other parts are pricy because of the skill set and labor behind it. Good job dude! 🏽 keep up the good work you do.
|
|
|
easycompositestv
(47 minutes ago)
In total we used about 20kgs of the Uni-Mould resin, 7kgs of chopped strand mat, 5kgs of the coupling coat and 5kgs of the tooling gelcoat however this is a small part (a FIAT 500) and a larger part would require more resins and glass. Remember that we made an inside mould and an outside mould.
|
Add comment